Start Point

Hey guys:
New to USPSA and my first time will be the 21th at Roanoke, kindly Mark S. put together the invitation mail and I have been adapting to my new gear the past 3 weeks, got the same gear I used before from South Africa and if feets perfect my Glock 35.
I was about to start with my personal gun a Glock 22 but I find very dificult to get on target with that gun, it is great to carry and conseal but definitely not something you would like to use at the range, on the other hand the 35 is much better accurate and easier to handle despite the longer barrel.
Definitely I am excited and ready to be part of the team.

What division to choose?

Standard Division

1	Minimum power factor for Major	170
2	Minimum power factor for Minor	125
3	Minimum bullet weight	No
4	Minimum bullet caliber / cartridge case length	9mm (0.354”) / 19mm (0.748")
5	Minimum bullet caliber for Major	10mm (0.40”)
6	Minimum trigger pull (see Appendix F2)	No
7	Maximum handgun size	Yes, see below
8	Maximum magazine length	Yes, see below
9	Maximum ammunition capacity	No
10	Max. distance of handgun and mags/speed loaders from torso	50mm
11	Rule 5.2.3.1 applies	Yes
12	Restriction on position of holster and other equipment	Yes, see below
13	Optical/electronic sights permitted	No
14	Compensators permitted	No
15	Ports permitted	No, see below

Seems that standar division for Major Power Factor is the right one, Production division has a list of approved guns to participate where G35 is not listed, I think I can participate in both divisions by switching to the G22, I will decide that on the Range once I talk to the Range Officials.

Production Division

1	Minimum power factor for Major	Not applicable
2	Minimum power factor for Minor	125
3	Minimum bullet weight	No
4	Minimum bullet caliber / cartridge case length	9mm (0.354”) / 19mm (0.748")
5	Minimum bullet caliber for Major	Not applicable
6	Minimum trigger pull (see Appendix F2)	2.27 kg (5lbs) for first shot
7	Maximum handgun size	Maximum barrel length 127mm (5”)
8	Maximum magazine length	Yes, see below.
9	Maximum ammunition capacity	No
10	Max. distance of handgun and mags/speed loaders from torso	50mm
11	Rule 5.2.3.1 applies	Yes
12	Restriction on position of holster and other equipment	Yes, see below.
13	Optical/electronic sights permitted	No
14	Compensators permitted	No
15	Ports permitted	No

List of permited guns:

Make	Model
ALFA-PROJ	Alfa Combat, Alfa Defender
ARCUS	98
ARMALITE	AR24, AR24K
ARMS MORAVIA	G2000
ARMSCOR	AP9, AP9MS, APP9, APP9MS, MAP1, MAPP1
ASAI AG	onePRO
ASTRA	A75, A100
BAIKAL	MP446
BERETTA	92 Series full size frame (including 92, 92D, 92DS, 92 F, 92FS, 92S, 92SB, 92SB-F, 92G-SD, 92FS Brigadier, 92FS Deluxe, 92G, 92G Elite, 92G Elite II, 92 FS Centurion, 92D Centurion,92G Centurion, 92 Stock, 92EL, 90Two) 92 Series Compact frame (including 92L Compact, 92SB Compact, 92 L Compact type M, 92SB compact type M, 92 Custom Carry) 96 Series full size frame (including 96, 96D, 96DS, 96G, 96 Brigadier, 96 D Brigadier, 96G Brigadier, 96G Elite, 96G Elite II, 96G-SD, 96 Centurion,96D Centurion, 96 Stock) 96 Series Compact frame (including 96L Compact, 96L Compact type M, 96D Compact, 96D Compact Type M) 98 Series (including 98F, 98FS, 98FS Brigadier, 98 Deluxe, 98 Stock) Vertec series (including 92G, 92FS, 92 Elite 1A, 92 Steel, 96G, 96FS, 96 Elite 1A, 96 Steel, 98 Steel) Cougar Series (including 8000 D/DL/FL/LP/Mini, 8040 D/F/Mini, 8045 D/F/Mini, 8357 D/F) 9000S Series (including Type D & F) PX4 Storm (Type F, G) Approved: Inox versions of approved models Not Approved: single-action only variants or laser equipped models
BERNARDELLI	2000, 2000 Baby
BERSA	Thunder 9/Thunder 40, Mini T9/T40
BROWNING	BDM, BDA, PRO9, PRO40 Not Approved: Hi-Power
BUL	Cherokee (full size, compact & mini), Impact, Storm
COLT	2000, Double Eagle (Any DAO or DA/SA revolver with a barrel length of up to 5" is approved)
CZ - CESKÁ STRAKONICE	ST9, TT9, TT40, TT45, MT9, MT9L
CZ - CESKA ZBROJOVKA	CZ75, CZ75B, CZ75B Stainless, CZ75BD, CZ75BD Police, CZ75 Compact, CZ75D Compact, CZ75 SemiCompact, CZ75 Combat II, CZ85, CZ85B, CZ85 Combat CZ40B, CZ97B, CZ99, CZ100, CZ110, CZ2075 Rami, CZ2075 Rami P CZ75 P01, CZ75 SP-01, CZ75 SP-01 Tactical, CZ75 SP-01 Shadow, CZ75 SP-01 Sport (9x21mm version with OFM trigger stop as sold in Italy), CZ75 SP-01 Phantom Also approved are variants with original Ceska Zbrojovka (CZUB) barrels which are longer than standard (e.g. SP-01A, SP-01DK, SP-01DK Shadow), provided the barrel length does not exceed 127mm, and provided all other aspects of these variants fully comply with all other Production Division rules. (CZUSA Custom Shop CZ 75 SP-01 is not approved)
DAEWOO	DP51, DH40
DESERT EAGLE	Eagle Compact, Baby Eagle
DLASK	226 clone
EAA	Witness (standard steel), Witness-P, Witness (decocker), Witness PS
FEG	P9R, P9RK
FN HERSTAL	FNP-9, FNP-9M, FNP-40, FNP-40M, FNP-9 DAO, FNP-40 DAO (Models BDA9, BDA40 are still under evaluation)
GLOCK	17, 19, 20, 21, 21SF, 22, 23, 26, 27, 29, 30, 31, 32, 33, 36, 37, 38, 39 Also approved are variants with original Glock barrels which are longer than standard (e.g. 17A, 17DK), as well as variants with "Tactical", "Mariner" or similar OFM engravings on the slide, provided the barrel length does not exceed 127mm, and provided all other aspects of these variants fully comply with all other Production Division rules. Not Approved: 18, 24, 25, 28, 34, 35, L and C models
GRAND POWER	K100, K100MK6, K-100 Dynamic and P1
H&K	USP, USP Stainless, USP Compact, USP Compact Stainless, USP Custom Sport, USP9SD, USP Tactical (barrel 127mm or shorter), USP Compact Tactical VP70Z, P8, P9S (only with 100mm barrel), P10, P30, P2000, P2000SK, P30L Not Approved: Mark 23, P7 Series, USP Elite, USP Expert, USP Production
HS PRODUKT	HS2000 Series (HS9, HS357, HS40, HS45)
IMI	Barak 9, Barak 40, Barak 45
JERICHO	941, 941S, 941F, 941FS, 941FB, 941FBL
KAHR	K Series (9mm,40cal, Lady & Elite), MK Series (9mm, 40cal, Micro & Elite), P Series (9mm and 40 cal), PM Series (9mm), T Series (Target & Tactical), TP Series
KEL-TEC	P11, P40
LLAMA	M-82
MAGNUM RESEARCH	SP21 (9mm,40SW,45ACP)
MANURHIN	MR73 revolvers (3" G3 and 4" G4 models only)
NORINCO	NC226, NP18, NP22, NP34, NP40, NZ75, NZ85
PARA-ORDNANCE	LDA (all models except Tac-Five and other variants with enlarged magwells)
REPUBLIC ARMS	Patriot
RUGER	P85, P89, KP89, P90, KP90, P91, KP93, P94, P95, K94/95, KP95, KP345, KP345PR, P97, SR9 / KBSR9 (Any DAO or DA/SA revolver with a barrel length of up to 5" is approved)
S&W	39, 59, 410, 439, 659, 669, 908, 910, 1006, 1066, 3913, 3913L, 3913TSW, 3914, 3953, 3953STSW, 4006, 4043, 4046, 4013TSW, 4053TSW, 4513TSW, 4553TSW, 457, 4506, 4566, 4586, 5904, 5906, 5946, 6906, 6946 SW99, M&P9, M&P9L, M&P357, M&P40, M&P45 (M&P9 Pro is not approved) (Any DAO or DA/SA revolver with a barrel length of up to 5" is approved)
SARSILMAZ	Kilinc 2000, Kilinc 2000 Light, Hancer 2000, Hancer 2000 Light, K2
SIG	P220, P220-1, P225, P228, P229, P239, P250DCc, P2009, SPC2009, SP2022, SP2340 P226, P226ST, P226 Sport II SL ohne Schiene, P226SL, P226SL Black, P226 Xpress, P226 X-Five Allround, P226 X-Five Tactical (not SAO version), P226R DAK, P226DAO, P226R, P226R Two Tone, P226 SAS, P226 Blackwater, P226 Equinox, P226 Stainless, P226 AL-SO, P226 SL-SO, P226 Sport Stock, P226 X-Five SO (SA/DA version only), P226 Navy, P226 SCT, P226 Elite (Also P220, P229, P239 equivalents of approved P226 models with maximum 5" barrel length) Not Approved: P220 X-Zone, P220 Sport, P226 HSP, P226 Sport, P226 Sport II SL mit Schiene, P226 X-Five, P226 X-Five Competition, P226 X-Six, P226R Crimson Trace
SIGMA	Compact SW9V, SW40W, SW40VE, SW9VE, SW9M, SW40F, SW40C, SW9F, SW9C
SPHINX	2000 Series (S, P, PS and H models), 3000 Series (Standard, Competition Production, Compact, Tactical, Police, SOP) All of the above in Steel, Stainless Steel, Titanium or Aluminium. Also approved are variants with original Sphinx barrels which are longer than standard provided the barrel length does not exceed 127mm, and provided all other aspects of these variants fully comply with all other Production Division rules.
SPRINGFIELD	P9, XD (except ported models)
SPS	Compact (SP II, SP II Plus, SP III) Police Compact (SPII, SPII Plus, SP3)
STAR	Megastar, M30, Ultrastar
STEYR	M-A1, M9, S9, M40, S40
STI	GP6
TANFOGLIO	Force 38, Force 38F Carry, Force 38F, Force 38L, Force 40, Force 40F Carry, Force 40F, Force 40L, Force 40R Carry, Force 40R, Force 45, Force 45F Carry, Force 45F, Force 45L, Force 45R Carry, Force 45R, Force 921, Force 921F Carry, Force 921F, Force 921L, Force 921R Carry, Force 921R, Force 99, Force Compact 40, Force Compact 45, Force Compact 921, Force Pro, GT10, GT21 Baby, GT21 Combat, GT21, GT23, GT40 Baby, GT40 Combat, GT40, GT45, P19 Combat, P19 Standard, P19L, P21 Combat, P21L, P23, P23L, P38L, P40 Compact, P40, P40F, P40FB, P40L, P40R, P41, P45, P45L, T94F, T94R, T95F Stock, T95F, T95R, T96F, T96R, T97F, T97L, T97R, TA10 Compact, TA10, TA40FB, TA45 Compact, TA45, TA90 XL2, XL4, Stock, Stock II, L, Combat Sport, TZ-75 C90, Limited PRO (Stock Custom model is NOT approved for Production Division)
TAURUS	PT92, PT911, PT99, PT940, PT945, P945 (except "C" models), PT100, PT101, PT111, PT140, PT145, PT921, M66, 827, 817, 809B, 809SS, 840B, 840SS, 845B, 845SS. 24/7 and 24/7 Pro models (SA/DA versions only, with barrel length up to 5"). Other 24/7 Pro models, and all OSS models, are not approved for Production Division Any DAO or DA/SA revolver with a barrel length of up to 5" is approved.
VEKTOR	SP1, SP2 (not Single Action), Z88
WALTHER	P1, PPS, P5, P38, P88, P99, P99QA, P99C, P99DAO, P99AS (and compact versions of these models)
WITNESS	Witness Steel, Witness Polymer, Witness P Carry, Witness Elite Stock (and subcompact versions) (Witness Carry Comp, Gold, Silver and Limited versions are not approved)
ZASTAVA	CZ99